mesh shear
We can offer you the following products for "mesh shear" :
EVG G 45/102 
[12075MEF] Mesh welding machine EVG G45 / 102, Mesh welding line for line and cross wires off spools, equipped for 15 line wires, line wire dia. 3 – 8 mm, cross wire dia. 3 – 8.5 mm, fully automatic from line wire pull-off system to mesh turning and stacking unit WST 8, max. width of mesh 2750 mm, line wire roller advance system JÄGER, line wire shear EVG M4/102, control unit SIEMENS
SCHLATTER PG 28
[12088HCS] Mesh welding machine Typ PG 28.4 / 7C
- Mesh welding line for line wires off spools
- cross wires pre-cut and straightened from magazine
- equipped for 25 line wires, line and cross wire dia. 3 – 8 mm
- complete from pay-off system to mesh turning and stacking unit WST6 (MWS10)
- line wire pull-out unit with balancing loop LAR
- line wire roller advance LVR
- cross wire magazine QS5 / QMD
- line wire shear
- max. width of wire mesh 2900 mm
- digital weld process control from SIEMENS and a new function control SIMATIC S7
optional mesh roll-up unit
SCHLATTER PG 28
[12089OVA] Mesh welding machine Typ PG 28.1 / 7C, mesh welding line for line wires off spools, cross wires pre-cut and straightened from magazine, equipped for 25 line wires, line and cross wire dia. 4 - 8 mm, complete from pay-off system to mesh turning and stacking unit, MAZ feeding system between line wire shear and turner/stacker, line wire pay-offs, balancing unit LAF, cross wire magazine QS5 / QMD, line wire shear M95/102, max. width of wire mesh 2900 mm, digital weld process control and new function control SIMATIC S5 / SWEP04
SCHLATTER PG 28
[12090OVA] Mesh welding machine Typ PG 28.1 / 7C, Mesh welding line for line- and cross wires pre-cut and straightened from magazine, equipped for 25 line wires, line and cross wire dia. 4 – 8 mm, complete from line wire feeding system LV1 to mesh turning and stacking unit, cross wire magazine QS5 / QMD, line wire shear M95/102, MAZ feeding system between shear and turner/stacker, max. width of wire mesh 2900 mm, digital weld process control and a new function control SIMATIC S5 / SWEP04
Mesh cutting shear EVG
[54054OVA] Hydraulic mesh cutting shear
- Cutting width max. 2850 mm
- Working range 3.5 – 6 mm at 50 mm spacing
- Electrical energy / three phase current 400V/50Hz
| Show 1 to 5 (of in total 5 products) for mesh shear |
Sites: 1 |